Upload to export, in one sitting.
The in-process stock model goes in as a STEP or STL. Custom soft jaws come out, ready to cut. The whole run takes minutes.
Mistakes caught at the desk, not at the mill.
The same constraints that fail a hand-modeled jaw at the machine are verified against the real part and the real vise before the design is finalized.
Square-corner tool access is where hand-modeled jaws go wrong most often. The cutter path is cleared around the part's corners as the jaw form is generated.
Jaw faces are generated at multiple heights instead of forcing a grip on one plane.
Consistent Z-height means the CAM program does not change from setup to setup, or part to part.
No designs that only close on paper. The jaw opening is verified against real vise travel.
Four steps. You confirm every one.
No re-modeling. No CAD license required.
Proposed by the system, confirmed by you. Override anything.
One pair for every setup the part needs.
Editable STEP, machined from your own jaw stock on your own equipment.
Cut from the blanks already on your shelf.
The built-in jaw blank library covers standard inch and metric sizes. Set length, width, height, and gap, or pick a preset. Every jaw is designed to be machined on your own equipment from your own stock jaws.
The part was checked this way. Now the fixture is too.
Every part that comes out of InfinitForm is built with manufacturability in the loop, from first concept to the shop floor. Soft Jaws applies that same physical intelligence to the workholding.
"I activated a trial and was generating custom soft jaws within minutes for my medical devices. What used to take hours now takes minutes, with no editing to machine."
Bring a part you already run. Upload the file, confirm the setup plan, and take the jaw STEP back to the shop.